DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE
DroneTag

DRONETAG MINI PROFESSIONAL REMOTE ID DEVICE

SKU: dronetag-mini

/

Professional Remote ID device attachable to any drone

Designed with expert pilots in mind. Combination of both Network & Direct / Broadcast Remote ID to make your drone flight safe & compliant.

Remote Identification

Network Remote Identification

Dronetag Mini transfers your drone's position and identification to our cloud. By displaying the real-time data in our app Dronetag enables advanced drone operations and coordination of manned and unmanned traffic in the same airspace.

Direct (Broadcast) Remote Identification

Your drone's info is transmitted via Bluetooth to up to 3 km (1.86 miles). With our Direct Remote ID, you fulfil all the new regulation necessities, and you are free to fly & touch the sky!

Supported regions

European Union

ASD-STAN
Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category. Mini is also capable of Network Remote ID, which will be mandatory for drone operations in so-called U-space.

USA

ASTM
Dronetag Mini is Approved by FAA (check the DoC here) and Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas.

Worldwide compliance

Mini is usable anywhere in the world with the Direct or Broadcast Remote ID via Bluetooth. The Network Remote ID functionality is fully dependent on the coverage of cellular networks. All countries using ASD-STAN or ASTM standards are supported. Check your local rules.

Smallest and lightest

Dronetag Mini is the smallest and lightest Remote ID device on the market

With the half size of a muesli bar, the weight of 32 g (1.1 oz), it offers everything you need to fly safe & compliant.

Independent, locked and with the longest battery life

Mini is attachable to any drone with a strong reclosable dual lock fastener (you can lift average drone by it). The device has internal GNSS, LTE and Bluetooth antennas and offers up to 14 hours of battery life. 

Features

  • Security at its best

    Security at its best

    Soldered chip SIM, firmware over the air updates, or DTLS encryption got you safe & secured.

  • Satellite icon

    Multi constellation GNSS receiver

    Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.

  • Microchip icon

    Built according to the newest Remote ID standards

    Compliant with Direct & Network Remote ID according to the prEN 4709-002 and ASTM F3411 Standards.

  • Bluetooth Icon

    Internal LTE, Bluetooth and GNSS antennas

    With an option to add external LTE and Bluetooth antennas for better signal reception.

  • Battery Icon

    Battery with up to 14 hours of endurance

    You can also use your drone as a power source for carefree flights without the need for charging.

  • Flight Icon

    Take-off, landing and free-fall detection

    Worry-free flight start and end. Mini warns other closed-by pilots about potential dangers.

  • Eye Icon

    Multiple sensors onboard

    GNSS position estimation, pressure altitude measurement and motion detection via accelerometer.

  • Controller icon

    MAVlink & DJI A3 support

    Professional DJI and Pixhawk flight controllers integration via our EXT port to get onboard data.

 


Dronetag App

Available on all devices

Dronetag App allows you to manage your devices, check the airspace zones, plan your flights, inspect airborne drones & flight plans and notify you about any airspace hazards.